West Vancouver, BC Mould Damage Remediation

Your West Vancouver home or commercial property can quickly become infested with mould if a source of water is present. Mould can spread throughout a property in as little as 48 hours. Since mould can produce allergens and irritants, you should call us to inspect your home if you suspect you have a mould problem. If mould is found, we have the training, equipment, and expertise to remediate your mould infestation.

Learn more about mould and what to do until help arrives by reviewing these mould damage tips.

SERVPRO of North Vancouver

If You See Signs of Mould, Call Us Today – (604) 725-3361

Understanding Mold

Microscopic mould spores exist almost everywhere, outdoors and indoors, making it impossible to remove all mould from a home or business. Some restoration businesses advertise “mould removal” and even guarantee to remove all mould, which is a fallacy. Consider the following mould facts:

  • Mould is present almost everywhere, indoors and outdoors.
  • Mould spores are microscopic and float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or on a pet.
  • Mould spores thrive on moisture. Mould spores can quickly grow into colonies when exposed to water. These colonies may produce allergens, irritants, and toxins. 
  • Before mould remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mould may return. 
  • Mould often produces a strong, musty odor and can lead you to possible mould problem areas.
  • Even higher-than-normal indoor humidity can support mould growth. Keep indoor humidity below 45 percent.

Faster to Any Size Emergency

In as little as 48 hours, a minor mould issue can quickly spread through a home or business. Once you contact us, we’re dedicated to starting the remediation process quickly. This fast response lessens the mould damage, limits additional damage, and reduces the remediation cost.

Locally Owned, with National Resources

SERVPRO of North Vancouver is locally owned and operated, so we are part of the West Vancouver community too. When you have a water or mould damage issue, we’re already nearby and ready to help. We’re also part of a network of over 2270, including special Disaster Recovery Teams placed strategically throughout the country to respond to large-scale fire, water, and storm disasters.

We proudly serve Vancouver, BC, North Vancouver, BC, West Vancouver, BC, and surrounding areas.

Highly Trained Water and Mould Restoration Specialists

We are trained mould damage specialists who get started quickly to get your home or business back to normal, with specific training and certifications to handle your restoration needs. Learn about our water and mould training and certificates.

The Mould Remediation Process

Every mould damage scenario is different and requires a unique solution, but the general mould remediation process stays the same. The steps listed below illustrate our “typical” process:

Step 1: Emergency Contact - (604) 725-3361

We’re available 24 hours, 7 days a week to answer your phone call. Our consultant will guide you through this process, asking questions that will allow us to better understand your situation and to determine the needed equipment and personnel.

Step 2: Inspection and Mould Damage Assessment

We carefully inspect your property for visible signs of mould. Mould feeds on cellulose and water and can be hidden from plain view. We use various technologies to detect mould and hidden water sources.

Step 3: Mould Containment

Our professionals use various containment procedures to prevent the spread of mould. We may use advanced containment procedures like negative air chambers to isolate the contaminated area with physical barriers and negative air pressure to keep the mould spores from spreading during the cleanup process. All fans and heating and cooling systems will be turned off to prevent the spread of mould.

Step 4: Air Filtration

We use powerful air scrubbers, HEPA vacuums, and other filtration equipment to remove microscopic mould spores out of the air. This air filtration process and our mold containment process help to prevent the spread of these mould spores while the mould remediation is in process.

Step 5: Removing Mould and Mould-Infested Materials

Depending on the amount of mould growth and the types of surfaces involved, the mould remediation process can vary significantly. In general, we’ll use antifungal and antimicrobial treatments to eliminate mould colonies and to help prevent new colonies from forming. Depending on the severity of the infestation, we may need to remove drywall, carpeting, and other porous materials.

Step 6: Cleaning Contents and Sanitizing

We clean your furniture, decorative items, curtains, clothing, and other restorable items affected by mould, using a variety of cleaning techniques to clean and disinfect your belongings. We’re also trained to remove odours and provide deodourisation using fogging equipment.

Step 7: Restoration

Depending on the level of mould damage, drywall, subfloors, and other building materials may have been removed. Restoration may involve minor repairs, such as replacing drywall, painting, and installing new carpet; or it may entail major repairs such as the reconstruction of various areas or rooms in a home or business. The restoration step gets your home or business back to normal.

SERVPRO knows Mould

In West Vancouver, BC, SERVPRO of North Vancouver is ready to tackle and resolve any mould issues that arise. SERVPRO professionals understand the anxiety that can happen when a homeowner uncovers mould. Let us help put your worries to rest. Our knowledgeable crew is ready with the gear needed to tackle any mould job. Reach us at (604) 725-3361 - We’re ready to activate our team to remediate your mould.